This is the latest recevied telemetry packets stored in our database for station/object DO2HN-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780158140 | 30.3 C | 23.97 % | 1019.88 hPa | 0 | 0 |
| 1780158124 | 30.3 C | 23.97 % | 1019.25 hPa | 0 | 0 |
| 1780158103 | 30.3 C | 23.97 % | 1019.25 hPa | 0 | 0 |
| 1780158075 | 30.4 C | 23.4 % | 1019.13 hPa | 0 | 0 |
| 1780158055 | 30.4 C | 23.4 % | 1019 hPa | 0 | 0 |
| 1780158029 | 30.4 C | 23.4 % | 1019.13 hPa | 0 | 0 |
| 1780158000 | 30.4 C | 24.31 % | 1020 hPa | 0 | 0 |
| 1780157984 | 30.4 C | 24.31 % | 1019.38 hPa | 0 | 0 |
| 1780157968 | 30.4 C | 24.31 % | 1020.25 hPa | 0 | 0 |
| 1780155909 | 29.7 C | 25.95 % | 1019 hPa | 0 | 0 |
| 1780155816 | 29.3 C | 26.01 % | 1019.25 hPa | 0 | 0 |
| 1780155779 | 29.2 C | 26.56 % | 1019 hPa | 0 | 0 |
| 1780155763 | 29.2 C | 26.56 % | 1019.5 hPa | 0 | 0 |
| 1780155747 | 29.2 C | 26.56 % | 1019.75 hPa | 0 | 0 |
| 1780155699 | 29.3 C | 26.35 % | 1021.13 hPa | 0 | 0 |
| 1780155666 | 29.3 C | 26.35 % | 988.88 hPa | 0 | 0 |
| 1780143782 | 41.7 C | 18.11 % | 1020.75 hPa | 0 | 0 |
| 1780142878 | 39.3 C | 18.79 % | 1019.75 hPa | 0 | 0 |
| 1780141974 | 37.9 C | 16.66 % | 1018.75 hPa | 0 | 0 |
| 1780141957 | 37.9 C | 16.66 % | 1019 hPa | 0 | 0 |
| 1780141941 | 38.3 C | 15.62 % | 1020.13 hPa | 0 | 0 |
| 1780141918 | 38.3 C | 15.62 % | 1020 hPa | 0 | 0 |
| 1780141902 | 38.3 C | 15.62 % | 1020.5 hPa | 0 | 0 |
| 1780141849 | 39.1 C | 14.78 % | 1018.25 hPa | 0 | 0 |
| 1780141833 | 39.1 C | 14.78 % | 1018.88 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)