This is the latest recevied telemetry packets stored in our database for station/object 9W2FNX-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790317686 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1790317663 | 4.88 VDC | 0 | 0 | 0 | 0 |
| 1790317632 | 4.89 VDC | 0 | 0 | 0 | 0 |
| 1790317609 | 4.06 VDC | 0 | 0 | 0 | 0 |
| 1790317593 | 3.96 VDC | 0 | 0 | 0 | 0 |
| 1790317541 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1790317514 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1790317499 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 1790317483 | 4.87 VDC | 0 | 0 | 0 | 0 |
| 1790317468 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1790317450 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1790317436 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1790317419 | 3.99 VDC | 0 | 0 | 0 | 0 |
| 1790317404 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1790317384 | 4.06 VDC | 0 | 0 | 0 | 0 |
| 1790317368 | 4.82 VDC | 0 | 0 | 0 | 0 |
| 1790317353 | 4.29 VDC | 0 | 0 | 0 | 0 |
| 1790317337 | 4.4 VDC | 0 | 0 | 0 | 0 |
| 1790317322 | 4.77 VDC | 0 | 0 | 0 | 0 |
| 1790317296 | 3.93 VDC | 0 | 0 | 0 | 0 |
| 1790317200 | 4.48 VDC | 0 | 0 | 0 | 0 |
| 1790317169 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1790317074 | 4.53 VDC | 0 | 0 | 0 | 0 |
| 1790317041 | 4.3 VDC | 0 | 0 | 0 | 0 |
| 1790317025 | 4.41 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)