This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | DC* | CPU* | p-Temp* | alt* | dB* |
|---|---|---|---|---|---|
| 1780161394 | 1443 | 37.6 | 73.8 | -146 | -69 |
| 1780161276 | 1426 | 37 | 73.8 | -148 | -69 |
| 1780160555 | 1376 | 37 | 72.8 | -143 | -71 |
| 1780159835 | 1358 | 36.5 | 72.2 | -143 | -70 |
| 1780159594 | 1353 | 36.5 | 72.1 | -147 | -69 |
| 1780159115 | 1345 | 36.5 | 71.4 | -150 | -63 |
| 1780158395 | 1337 | 36.5 | 70.6 | -152 | -62 |
| 1780157794 | 1330 | 35.4 | 69.9 | -154 | -63 |
| 1780157675 | 1328 | 35.4 | 69.9 | -153 | -64 |
| 1780156955 | 1321 | 35.4 | 69.1 | -153 | -62 |
| 1780156236 | 1315 | 34.9 | 68.6 | -151 | -64 |
| 1780155994 | 1312 | 34.3 | 68.3 | -151 | -63 |
| 1780155515 | 1319 | 34.3 | 67.4 | -146 | -63 |
| 1780154795 | 1329 | 34.9 | 66.9 | -146 | -62 |
| 1780154194 | 1321 | 33.2 | 66 | -147 | -64 |
| 1780154075 | 1321 | 33.2 | 65.9 | -147 | -63 |
| 1780153355 | 1311 | 33.2 | 64.6 | -142 | -62 |
| 1780152636 | 1299 | 32.2 | 63.4 | -143 | -64 |
| 1780152394 | 1296 | 32.2 | 62.9 | -146 | -65 |
| 1780151916 | 1288 | 31.1 | 62.2 | -146 | -66 |
| 1780151196 | 1271 | 30.6 | 60.8 | -146 | -62 |
| 1780150594 | 1259 | 30 | 60 | -140 | -63 |
| 1780150475 | 1259 | 30 | 59.8 | -138 | -62 |
| 1780149754 | 1249 | 28.9 | 58.6 | -140 | -64 |
| 1780149035 | 1244 | 28.9 | 57.3 | -133 | -63 |
*Used Equation Coefficients:
DC: 0, 1, 1000
CPU: 0, 0.1, 0
p-Temp: 0, 0.1, 0
alt: 0, 1, -1000
dB: 0, -1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)