This is the latest recevied telemetry packets stored in our database for station/object VA2AIG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Ibat* | Text* | Pres* | Humd* |
|---|---|---|---|---|---|
| 1736714211 | 4.15 Volt | 0 ma | -4.3 C | 96720 Pa | 79 % |
| 1736713011 | 4.15 Volt | 0 ma | -4 C | 96720 Pa | 77 % |
| 1736711811 | 4.13 Volt | 0 ma | -3.9 C | 96720 Pa | 76 % |
| 1736711211 | 4.16 Volt | 0 ma | -3.9 C | 96720 Pa | 75 % |
| 1736710611 | 4.17 Volt | 0 ma | -3.5 C | 96720 Pa | 75 % |
| 1736709411 | 4.16 Volt | 0 ma | -3.4 C | 96720 Pa | 73 % |
| 1736708211 | 4.16 Volt | 0 ma | -2.2 C | 96720 Pa | 68 % |
| 1736707611 | 4.13 Volt | 0 ma | -0.8 C | 96700 Pa | 67 % |
| 1736707011 | 4.11 Volt | 0 ma | 1 C | 96700 Pa | 63 % |
| 1736705811 | 4.14 Volt | 0 ma | 1.1 C | 96720 Pa | 60 % |
| 1736704611 | 4.12 Volt | 0 ma | 7.6 C | 96620 Pa | 50 % |
| 1736704011 | 4.1 Volt | 0 ma | 1.8 C | 96700 Pa | 61 % |
| 1736703411 | 4.1 Volt | 0 ma | 1.2 C | 96720 Pa | 62 % |
| 1736702210 | 4.1 Volt | 0 ma | -0.5 C | 96760 Pa | 63 % |
| 1736701011 | 4.11 Volt | 0 ma | -1.3 C | 96780 Pa | 64 % |
| 1736700411 | 4.09 Volt | 0 ma | -1 C | 96780 Pa | 65 % |
| 1736699811 | 4.1 Volt | 0 ma | -2.6 C | 96820 Pa | 69 % |
| 1736698611 | 4.09 Volt | 0 ma | -3.8 C | 96840 Pa | 72 % |
| 1736697411 | 4.1 Volt | 0 ma | -4.2 C | 96840 Pa | 73 % |
| 1736696811 | 4.13 Volt | 0 ma | -4.9 C | 96860 Pa | 74 % |
| 1736696211 | 4.13 Volt | 0 ma | -4.7 C | 96840 Pa | 74 % |
| 1736695011 | 4.13 Volt | 0 ma | -5.9 C | 96880 Pa | 75 % |
| 1736693811 | 4.14 Volt | 0 ma | -7.1 C | 96900 Pa | 78 % |
| 1736693211 | 4.1 Volt | 0 ma | -7.9 C | 96900 Pa | 81 % |
| 1736692611 | 4.07 Volt | 0 ma | -8.8 C | 96920 Pa | 82 % |
*Used Equation Coefficients:
Vbat: 0, 0.01, 0
Ibat: 0, 1, -2000
Text: 0, 0.1, -50
Pres: 0, 20, 0
Humd: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)