This is the latest recevied telemetry packets stored in our database for station/object HS5TQA-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BAR* | BAT* | SAT* |
|---|---|---|---|---|---|
| 1773758638 | 30.63 °C | 79 %RH | 1011.4 hPa | 13.3 V | 30 |
| 1773752560 | 32.19 °C | 79.5 %RH | 1010.2 hPa | 13.3 V | 28 |
| 1773746480 | 34.93 °C | 80.2 %RH | 1009.3 hPa | 13.31 V | 32 |
| 1773740402 | 37.99 °C | 79.2 %RH | 1008.2 hPa | 13.4 V | 30 |
| 1773734322 | 37.37 °C | 82.7 %RH | 1008.9 hPa | 13.43 V | 31 |
| 1773728243 | 33.98 °C | 88.2 %RH | 1010.5 hPa | 13.5 V | 26 |
| 1773722166 | 29.88 °C | 84.2 %RH | 1012.3 hPa | 13.4 V | 29 |
| 1773716085 | 28.21 °C | 85 %RH | 1013 hPa | 13.32 V | 29 |
| 1773710008 | 26.78 °C | 86.4 %RH | 1012.4 hPa | 13.29 V | 28 |
| 1773703930 | 26.7 °C | 86.5 %RH | 1010.8 hPa | 13.23 V | 27 |
| 1773697851 | 27.79 °C | 86 %RH | 1010.1 hPa | 13.24 V | 28 |
| 1773691767 | 28.45 °C | 85.8 %RH | 1009.7 hPa | 13.23 V | 27 |
| 1773685687 | 28.83 °C | 85.6 %RH | 1010.8 hPa | 13.3 V | 27 |
| 1773679610 | 29.3 °C | 85.1 %RH | 1011.3 hPa | 13.25 V | 30 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
BAR: 0, 0.1, 800
BAT: 0, 0.01, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)