This is the latest recevied telemetry packets stored in our database for station/object OH7LZB-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790326525 | 4056 | 3639 | 3113 | 0 | 0 |
| 1790325685 | 4056 | 3636 | 3119 | 0 | 0 |
| 1790324940 | 4053 | 3645 | 3128 | 0 | 0 |
| 1790324145 | 4053 | 3642 | 3119 | 0 | 0 |
| 1790323395 | 4053 | 3634 | 3113 | 0 | 0 |
| 1790322580 | 4053 | 3636 | 3113 | 0 | 0 |
| 1790321760 | 4053 | 3642 | 3119 | 0 | 0 |
| 1790320900 | 4053 | 3634 | 3122 | 0 | 0 |
| 1790320040 | 4053 | 3639 | 3122 | 0 | 0 |
| 1790319185 | 4050 | 3634 | 3116 | 0 | 0 |
| 1790318375 | 4050 | 3636 | 3110 | 0 | 0 |
| 1790317590 | 4050 | 3642 | 3107 | 0 | 0 |
| 1790316695 | 4050 | 3634 | 3105 | 0 | 0 |
| 1790315800 | 4050 | 3639 | 3102 | 0 | 0 |
| 1790314930 | 4048 | 3634 | 3102 | 0 | 0 |
| 1790314120 | 4048 | 3636 | 3105 | 0 | 0 |
| 1790313370 | 4048 | 3628 | 3107 | 0 | 0 |
| 1790312535 | 4048 | 3634 | 3113 | 0 | 0 |
| 1790311755 | 4048 | 3636 | 3116 | 0 | 0 |
| 1790310906 | 4048 | 3631 | 3122 | 0 | 0 |
| 1790310185 | 4048 | 3634 | 3119 | 0 | 0 |
| 1790309300 | 4048 | 3631 | 3110 | 0 | 0 |
| 1790308405 | 4045 | 3634 | 3105 | 0 | 0 |
| 1790307590 | 4045 | 3625 | 3099 | 0 | 0 |
| 1790306745 | 4045 | 3628 | 3102 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)