This is the latest recevied telemetry packets stored in our database for station/object SP2UUU-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780210817 | 135 Count | 156 Count | 135 Count | 4.18 VDC | 0.18 VDC |
| 1780209017 | 133 Count | 154 Count | 133 Count | 4.2 VDC | 0.18 VDC |
| 1780207216 | 131 Count | 152 Count | 131 Count | 4.19 VDC | 0.18 VDC |
| 1780205416 | 125 Count | 146 Count | 125 Count | 4.2 VDC | 0.18 VDC |
| 1780203616 | 123 Count | 144 Count | 123 Count | 4.16 VDC | 0.18 VDC |
| 1780201816 | 119 Count | 140 Count | 119 Count | 4.19 VDC | 0.18 VDC |
| 1780200015 | 117 Count | 138 Count | 117 Count | 4.19 VDC | 0.18 VDC |
| 1780198219 | 115 Count | 136 Count | 115 Count | 4.18 VDC | 0.18 VDC |
| 1780196419 | 108 Count | 129 Count | 108 Count | 4.17 VDC | 0.18 VDC |
| 1780194618 | 106 Count | 127 Count | 106 Count | 4.18 VDC | 0.18 VDC |
| 1780192818 | 104 Count | 125 Count | 104 Count | 4.21 VDC | 0.16 VDC |
| 1780191018 | 102 Count | 123 Count | 102 Count | 4.2 VDC | 0.16 VDC |
| 1780189218 | 100 Count | 121 Count | 100 Count | 4.19 VDC | 0.18 VDC |
| 1780187426 | 99 Count | 120 Count | 99 Count | 4.17 VDC | 0.16 VDC |
| 1780185618 | 97 Count | 118 Count | 97 Count | 4.19 VDC | 0.18 VDC |
| 1780183818 | 92 Count | 112 Count | 92 Count | 4.17 VDC | 0.18 VDC |
| 1780182019 | 90 Count | 110 Count | 90 Count | 4.17 VDC | 0.18 VDC |
| 1780180217 | 89 Count | 109 Count | 89 Count | 4.18 VDC | 0.18 VDC |
| 1780178417 | 88 Count | 108 Count | 88 Count | 4.18 VDC | 0.18 VDC |
| 1780176616 | 86 Count | 106 Count | 86 Count | 4.21 VDC | 0.18 VDC |
| 1780174816 | 84 Count | 104 Count | 84 Count | 4.18 VDC | 0.18 VDC |
| 1780173015 | 82 Count | 102 Count | 82 Count | 4.17 VDC | 0.2 VDC |
| 1780171215 | 80 Count | 100 Count | 80 Count | 4.2 VDC | 0.18 VDC |
| 1780169415 | 78 Count | 98 Count | 78 Count | 4.17 VDC | 0.18 VDC |
| 1780167615 | 76 Count | 96 Count | 76 Count | 4.2 VDC | 0.18 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)