This is the latest recevied telemetry packets stored in our database for station/object SP2JAR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temperatura CPU* | Obciazenie CPU* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1789979049 | 1.7 Deg.C | 142 % | 0 | 0 | 0 |
| 1789977249 | 1.6 Deg.C | 129 % | 0 | 0 | 0 |
| 1789975448 | 1.5 Deg.C | 122 % | 0 | 0 | 0 |
| 1789973647 | 1.4 Deg.C | 115 % | 0 | 0 | 0 |
| 1789971843 | 1.3 Deg.C | 108 % | 0 | 0 | 0 |
| 1789970043 | 1.2 Deg.C | 102 % | 0 | 0 | 0 |
| 1789968241 | 1.1 Deg.C | 96 % | 0 | 0 | 0 |
| 1789966440 | 1 Deg.C | 87 % | 0 | 0 | 0 |
| 1789964639 | 0.9 Deg.C | 80 % | 0 | 0 | 0 |
| 1789962839 | 0.8 Deg.C | 72 % | 0 | 0 | 0 |
| 1789961037 | 0.7 Deg.C | 65 % | 0 | 0 | 0 |
| 1789959236 | 0.6 Deg.C | 57 % | 0 | 0 | 0 |
| 1789957435 | 0.5 Deg.C | 50 % | 0 | 0 | 0 |
| 1789955635 | 0.4 Deg.C | 37 % | 0 | 0 | 0 |
| 1789953834 | 0.3 Deg.C | 29 % | 0 | 0 | 0 |
| 1789952033 | 0.2 Deg.C | 23 % | 0 | 0 | 0 |
| 1789950254 | 0.1 Deg.C | 14 % | 0 | 0 | 0 |
| 1789948453 | 0 Deg.C | 7 % | 0 | 0 | 0 |
| 1789946652 | 26.4 Deg.C | 1007 % | 0 | 0 | 0 |
| 1789944851 | 26.3 Deg.C | 997 % | 0 | 0 | 0 |
| 1789943051 | 26.2 Deg.C | 989 % | 0 | 0 | 0 |
| 1789941250 | 26.1 Deg.C | 982 % | 0 | 0 | 0 |
| 1789939449 | 26 Deg.C | 974 % | 0 | 0 | 0 |
| 1789937648 | 25.9 Deg.C | 967 % | 0 | 0 | 0 |
| 1789935847 | 25.8 Deg.C | 959 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temperatura CPU: 0, 0.1, 0
Obciazenie CPU: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)