This is the latest recevied telemetry packets stored in our database for station/object DF1IAN-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786403637 | 30.4 | 1028.75 | 0 | 0 | 0 |
| 1786400225 | 31.1 | 1017.88 | 0 | 0 | 0 |
| 1786392765 | 32.6 | 1020.25 | 0 | 0 | 0 |
| 1786386512 | 33.9 | 1016.13 | 0 | 0 | 0 |
| 1786382402 | 34.4 | 1019.88 | 0 | 0 | 0 |
| 1786379325 | 34.4 | 1021.88 | 0 | 0 | 0 |
| 1786377644 | 34.4 | 1013.13 | 0 | 0 | 0 |
| 1786373964 | 34.1 | 1020 | 0 | 0 | 0 |
| 1786373157 | 34 | 1015.88 | 0 | 0 | 0 |
| 1786367351 | 33.9 | 1019.13 | 0 | 0 | 0 |
| 1786361455 | 32.1 | 1012 | 0 | 0 | 0 |
| 1786357348 | 30.1 | 1026.75 | 0 | 0 | 0 |
| 1786354789 | 28.8 | 1015.38 | 0 | 0 | 0 |
| 1786350805 | 27.2 | 1022.88 | 0 | 0 | 0 |
| 1786348592 | 26.5 | 1019.88 | 0 | 0 | 0 |
| 1786342590 | 25.6 | 1017.25 | 0 | 0 | 0 |
| 1786340285 | 25.8 | 1023.13 | 0 | 0 | 0 |
| 1786332650 | 27.1 | 1019.25 | 0 | 0 | 0 |
| 1786329506 | 27.9 | 1022 | 0 | 0 | 0 |
| 1786326793 | 28.4 | 1020.63 | 0 | 0 | 0 |
| 1786321276 | 29.6 | 1022 | 0 | 0 | 0 |
| 1786319266 | 30 | 1021 | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)