This is the latest recevied telemetry packets stored in our database for station/object W5SMB-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765418689 | 474 Volts | 595 Deg.F | 0 | 0 | 0 |
| 1765418657 | 474 Volts | 594 Deg.F | 0 | 0 | 0 |
| 1765418647 | 473 Volts | 594 Deg.F | 0 | 0 | 0 |
| 1765418617 | 472 Volts | 594 Deg.F | 0 | 0 | 0 |
| 1765418607 | 473 Volts | 593 Deg.F | 0 | 0 | 0 |
| 1765418577 | 474 Volts | 592 Deg.F | 0 | 0 | 0 |
| 1765418547 | 475 Volts | 591 Deg.F | 0 | 0 | 0 |
| 1765418517 | 472 Volts | 590 Deg.F | 0 | 0 | 0 |
| 1765418471 | 476 Volts | 588 Deg.F | 0 | 0 | 0 |
| 1765418440 | 469 Volts | 587 Deg.F | 0 | 0 | 0 |
| 1765418410 | 484 Volts | 586 Deg.F | 0 | 0 | 0 |
| 1765418371 | 491 Volts | 584 Deg.F | 0 | 0 | 0 |
| 1765418349 | 490 Volts | 584 Deg.F | 0 | 0 | 0 |
| 1765418339 | 489 Volts | 584 Deg.F | 0 | 0 | 0 |
| 1765418327 | 483 Volts | 584 Deg.F | 0 | 0 | 0 |
| 1765412961 | 478 Volts | 606 Deg.F | 0 | 0 | 0 |
| 1765412931 | 472 Volts | 602 Deg.F | 0 | 0 | 0 |
| 1765412900 | 474 Volts | 601 Deg.F | 0 | 0 | 0 |
| 1765412871 | 469 Volts | 601 Deg.F | 0 | 0 | 0 |
| 1765412858 | 476 Volts | 600 Deg.F | 0 | 0 | 0 |
| 1765412797 | 471 Volts | 598 Deg.F | 0 | 0 | 0 |
| 1765412767 | 479 Volts | 597 Deg.F | 0 | 0 | 0 |
| 1765412736 | 479 Volts | 596 Deg.F | 0 | 0 | 0 |
| 1765412712 | 481 Volts | 595 Deg.F | 0 | 0 | 0 |
| 1765412681 | 491 Volts | 594 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)