This is the latest recevied telemetry packets stored in our database for station/object DH1NSP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780196424 | 0 Count | 132 Count | 0 Count | 0 VDC | 0 VDC |
| 1780194623 | 0 Count | 131 Count | 0 Count | 0 VDC | 0 VDC |
| 1780192822 | 0 Count | 130 Count | 0 Count | 0 VDC | 0 VDC |
| 1780191022 | 0 Count | 129 Count | 0 Count | 0 VDC | 0 VDC |
| 1780189222 | 0 Count | 128 Count | 0 Count | 0 VDC | 0 VDC |
| 1780187422 | 0 Count | 127 Count | 0 Count | 0 VDC | 0 VDC |
| 1780185622 | 0 Count | 125 Count | 0 Count | 0 VDC | 0 VDC |
| 1780183822 | 0 Count | 124 Count | 0 Count | 0 VDC | 0 VDC |
| 1780182022 | 0 Count | 123 Count | 0 Count | 0 VDC | 0 VDC |
| 1780180222 | 0 Count | 122 Count | 0 Count | 0 VDC | 0 VDC |
| 1780178422 | 0 Count | 121 Count | 0 Count | 0 VDC | 0 VDC |
| 1780176621 | 0 Count | 120 Count | 0 Count | 0 VDC | 0 VDC |
| 1780174821 | 0 Count | 119 Count | 0 Count | 0 VDC | 0 VDC |
| 1780173021 | 0 Count | 118 Count | 0 Count | 0 VDC | 0 VDC |
| 1780171222 | 0 Count | 117 Count | 0 Count | 0 VDC | 0 VDC |
| 1780169422 | 0 Count | 115 Count | 0 Count | 0 VDC | 0 VDC |
| 1780167622 | 0 Count | 114 Count | 0 Count | 0 VDC | 0 VDC |
| 1780165822 | 0 Count | 113 Count | 0 Count | 0 VDC | 0 VDC |
| 1780164022 | 0 Count | 112 Count | 0 Count | 0 VDC | 0 VDC |
| 1780162222 | 0 Count | 111 Count | 0 Count | 0 VDC | 0 VDC |
| 1780160421 | 0 Count | 109 Count | 0 Count | 0 VDC | 0 VDC |
| 1780158621 | 0 Count | 108 Count | 0 Count | 0 VDC | 0 VDC |
| 1780156821 | 0 Count | 107 Count | 0 Count | 0 VDC | 0 VDC |
| 1780155021 | 0 Count | 106 Count | 0 Count | 0 VDC | 0 VDC |
| 1780153221 | 0 Count | 93 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)