This is the latest recevied telemetry packets stored in our database for station/object SP8MB-L. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773753808 | 111 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773753687 | 110 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773753566 | 109 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773753445 | 108 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773753324 | 107 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773753204 | 106 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773753083 | 105 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773752962 | 104 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773752841 | 103 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773752720 | 102 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773752599 | 101 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773752479 | 100 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773752358 | 99 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773752237 | 98 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773752116 | 97 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773751995 | 96 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773751874 | 95 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773751753 | 94 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773751633 | 93 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773751511 | 92 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773751390 | 91 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773751269 | 90 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773751148 | 89 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773751027 | 88 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773750906 | 87 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)