This is the latest recevied telemetry packets stored in our database for station/object HK6L-20. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764973813 | 4.29 VDC | 3.74 VDC | 0 | 0 | 0 |
| 1764972911 | 4.29 VDC | 3.7 VDC | 0 | 0 | 0 |
| 1764972010 | 4.29 VDC | 3.8 VDC | 0 | 0 | 0 |
| 1764971110 | 4.29 VDC | 3.8 VDC | 0 | 0 | 0 |
| 1764970209 | 4.29 VDC | 3.8 VDC | 0 | 0 | 0 |
| 1764969309 | 4.29 VDC | 3.8 VDC | 0 | 0 | 0 |
| 1764968409 | 4.29 VDC | 3.8 VDC | 0 | 0 | 0 |
| 1764967508 | 4.27 VDC | 3.74 VDC | 0 | 0 | 0 |
| 1764966607 | 4.28 VDC | 3.8 VDC | 0 | 0 | 0 |
| 1764965707 | 4.28 VDC | 3.8 VDC | 0 | 0 | 0 |
| 1764964807 | 4.28 VDC | 3.84 VDC | 0 | 0 | 0 |
| 1764963906 | 4.29 VDC | 3.8 VDC | 0 | 0 | 0 |
| 1764963006 | 4.28 VDC | 3.82 VDC | 0 | 0 | 0 |
| 1764962105 | 4.28 VDC | 3.82 VDC | 0 | 0 | 0 |
| 1764961205 | 4.28 VDC | 3.8 VDC | 0 | 0 | 0 |
| 1764960304 | 4.28 VDC | 3.74 VDC | 0 | 0 | 0 |
| 1764959404 | 4.29 VDC | 3.78 VDC | 0 | 0 | 0 |
| 1764958503 | 4.29 VDC | 3.76 VDC | 0 | 0 | 0 |
| 1764957602 | 4.29 VDC | 3.76 VDC | 0 | 0 | 0 |
| 1764956702 | 4.29 VDC | 3.74 VDC | 0 | 0 | 0 |
| 1764955801 | 4.28 VDC | 3.7 VDC | 0 | 0 | 0 |
| 1764954901 | 4.28 VDC | 3.72 VDC | 0 | 0 | 0 |
| 1764954000 | 4.28 VDC | 3.66 VDC | 0 | 0 | 0 |
| 1764953100 | 4.29 VDC | 3.62 VDC | 0 | 0 | 0 |
| 1764952199 | 4.29 VDC | 3.7 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)