This is the latest recevied telemetry packets stored in our database for station/object OROTAC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1769969999 | 9 | 29.7 C | 3.83 V | 20 M | 0 |
| 1769969359 | 9 | 29.3 C | 3.83 V | 0 M | 0 |
| 1769967598 | 8 | 28.6 C | 3.85 V | 0 M | 0 |
| 1769967118 | 10 | 28.5 C | 3.85 V | 10 M | 0 |
| 1769966958 | 10 | 28.6 C | 3.85 V | 20 M | 0 |
| 1769966798 | 10 | 28.3 C | 3.86 V | 20 M | 0 |
| 1769966478 | 9 | 27.9 C | 3.85 V | 20 M | 0 |
| 1769966319 | 10 | 28.1 C | 3.86 V | 0 M | 0 |
| 1769966158 | 10 | 28.1 C | 3.86 V | 0 M | 0 |
| 1769964238 | 9 | 29.1 C | 3.89 V | 20 M | 0 |
| 1769963918 | 9 | 29.6 C | 3.89 V | 20 M | 0 |
| 1769963118 | 10 | 29.5 C | 3.89 V | 20 M | 0 |
| 1769962478 | 10 | 30.5 C | 3.9 V | 20 M | 0 |
| 1769962319 | 9 | 30.4 C | 3.9 V | 20 M | 0 |
| 1769961038 | 10 | 30 C | 3.91 V | 20 M | 0 |
| 1769960878 | 10 | 29.9 C | 3.92 V | 20 M | 0 |
| 1769960558 | 11 | 29.8 C | 3.92 V | 20 M | 0 |
| 1769960238 | 10 | 29.4 C | 3.92 V | 20 M | 0 |
| 1769960078 | 7 | 29.1 C | 3.92 V | 20 M | 0 |
| 1769959278 | 8 | 29.6 C | 3.94 V | 20 M | 0 |
| 1769959118 | 7 | 29.3 C | 3.93 V | 10 M | 0 |
| 1769958959 | 7 | 29 C | 3.95 V | 10 M | 0 |
| 1769958638 | 6 | 28.3 C | 3.94 V | 20 M | 0 |
| 1769958318 | 7 | 28.1 C | 3.94 V | 20 M | 0 |
| 1769958159 | 7 | 27.6 C | 3.93 V | 20 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)