This is the latest recevied telemetry packets stored in our database for station/object KF4KUL-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780160812 | 400 | 653 | 0 | 0 | 0 |
| 1780159014 | 400 | 650 | 0 | 0 | 0 |
| 1780157218 | 399 | 645 | 0 | 0 | 0 |
| 1780155421 | 399 | 642 | 0 | 0 | 0 |
| 1780153626 | 399 | 638 | 0 | 0 | 0 |
| 1780151830 | 400 | 635 | 0 | 0 | 0 |
| 1780150035 | 400 | 633 | 0 | 0 | 0 |
| 1780148240 | 400 | 631 | 0 | 0 | 0 |
| 1780146446 | 400 | 630 | 0 | 0 | 0 |
| 1780144651 | 400 | 628 | 0 | 0 | 0 |
| 1780142857 | 400 | 627 | 0 | 0 | 0 |
| 1780141064 | 400 | 626 | 0 | 0 | 0 |
| 1780139270 | 401 | 625 | 0 | 0 | 0 |
| 1780137476 | 400 | 625 | 0 | 0 | 0 |
| 1780135682 | 400 | 626 | 0 | 0 | 0 |
| 1780133887 | 401 | 627 | 0 | 0 | 0 |
| 1780132093 | 401 | 627 | 0 | 0 | 0 |
| 1780130299 | 400 | 627 | 0 | 0 | 0 |
| 1780128504 | 401 | 627 | 0 | 0 | 0 |
| 1780126710 | 401 | 628 | 0 | 0 | 0 |
| 1780124915 | 401 | 628 | 0 | 0 | 0 |
| 1780123120 | 402 | 628 | 0 | 0 | 0 |
| 1780121326 | 401 | 629 | 0 | 0 | 0 |
| 1780119531 | 402 | 629 | 0 | 0 | 0 |
| 1780117737 | 401 | 630 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)