This is the latest recevied telemetry packets stored in our database for station/object DO6GZ-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769777333 | 4.32 V | 35 | 0 | 0 | 0 |
| 1769777217 | 4.47 V | 33 | 0 | 0 | 0 |
| 1769777101 | 4.45 V | 34 | 0 | 0 | 0 |
| 1769776067 | 4.48 V | 23 | 0 | 0 | 0 |
| 1769775952 | 4.45 V | 18 | 0 | 0 | 0 |
| 1769775835 | 4.3 V | 19 | 0 | 0 | 0 |
| 1769775603 | 4.45 V | 13 | 0 | 0 | 0 |
| 1769775139 | 3.63 V | 0 | 0 | 0 | 0 |
| 1769773168 | 4.47 V | 28 | 0 | 0 | 0 |
| 1769772821 | 4.47 V | 18 | 0 | 0 | 0 |
| 1769771744 | 4.47 V | 29 | 0 | 0 | 0 |
| 1769771628 | 4.47 V | 33 | 0 | 0 | 0 |
| 1769771506 | 4.47 V | 35 | 0 | 0 | 0 |
| 1769771390 | 4.48 V | 32 | 0 | 0 | 0 |
| 1769771281 | 4.47 V | 34 | 0 | 0 | 0 |
| 1769770934 | 4.46 V | 33 | 0 | 0 | 0 |
| 1769770818 | 4.47 V | 32 | 0 | 0 | 0 |
| 1769770355 | 4.47 V | 28 | 0 | 0 | 0 |
| 1769770239 | 4.47 V | 31 | 0 | 0 | 0 |
| 1769770123 | 4.47 V | 28 | 0 | 0 | 0 |
| 1769769660 | 4.41 V | 31 | 0 | 0 | 0 |
| 1769769313 | 4.44 V | 32 | 0 | 0 | 0 |
| 1769768734 | 4.44 V | 35 | 0 | 0 | 0 |
| 1769767345 | 4.5 V | 33 | 0 | 0 | 0 |
| 1769767230 | 4.44 V | 25 | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0.01
Satellite: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)