This is the latest recevied telemetry packets stored in our database for station/object SQ8BS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786396700 | 0 Count | 55 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1786396400 | 0 Count | 50 Count | 0 Count | 4.14 VDC | 0 VDC |
| 1786396100 | 0 Count | 46 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1786395800 | 0 Count | 42 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1786395500 | 0 Count | 36 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1786395200 | 0 Count | 33 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1786394900 | 0 Count | 30 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1786394599 | 0 Count | 26 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1786394299 | 0 Count | 21 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1786393999 | 0 Count | 19 Count | 0 Count | 4.47 VDC | 0 VDC |
| 1786393699 | 0 Count | 15 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1786393399 | 0 Count | 8 Count | 0 Count | 4.46 VDC | 0 VDC |
| 1786393099 | 0 Count | 1005 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1786392799 | 0 Count | 993 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1786392499 | 0 Count | 975 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1786392199 | 0 Count | 955 Count | 0 Count | 4.47 VDC | 0 VDC |
| 1786391899 | 0 Count | 938 Count | 0 Count | 4.47 VDC | 0 VDC |
| 1786391599 | 0 Count | 929 Count | 0 Count | 4.47 VDC | 0 VDC |
| 1786391299 | 0 Count | 912 Count | 0 Count | 4.47 VDC | 0 VDC |
| 1786390999 | 0 Count | 888 Count | 0 Count | 4.46 VDC | 0 VDC |
| 1786390698 | 0 Count | 875 Count | 0 Count | 4.46 VDC | 0 VDC |
| 1786390398 | 0 Count | 867 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1786390098 | 0 Count | 851 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1786389798 | 0 Count | 837 Count | 0 Count | 4.46 VDC | 0 VDC |
| 1786389498 | 0 Count | 827 Count | 0 Count | 4.32 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)