PenangAPRS Track

My position About ☰

reset

OK4JL-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK4JL-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatu*	Humidity*	Pressure*	Satellite*
1769858599	26.61 °C	39.15 %	972.6 hPa	7
1769858538	26.6 °C	39.2 %	972.6 hPa	7
1769858479	26.59 °C	39.19 %	972.6 hPa	7
1769858419	26.57 °C	39.26 %	972.5 hPa	11
1769858358	26.55 °C	39.29 %	972.5 hPa	7
1769858299	26.54 °C	39.35 %	972.5 hPa	7
1769858239	26.53 °C	39.38 %	972.5 hPa	7
1769858179	26.52 °C	40.47 %	972.5 hPa	7
1769858119	26.5 °C	39.48 %	972.5 hPa	5
1769858059	26.48 °C	39.48 %	972.5 hPa	5
1769857999	26.46 °C	39.54 %	972.5 hPa	6
1769857939	26.45 °C	39.54 %	972.5 hPa	7
1769857878	26.45 °C	39.58 %	972.5 hPa	6
1769857819	26.44 °C	39.59 %	972.5 hPa	9
1769857760	26.43 °C	39.64 %	972.5 hPa	6
1769857698	26.42 °C	39.62 %	972.4 hPa	5
1769857638	26.4 °C	39.65 %	972.4 hPa	6
1769857578	26.39 °C	39.7 %	972.4 hPa	6
1769857519	26.38 °C	39.74 %	972.4 hPa	6
1769857459	26.37 °C	39.78 %	972.4 hPa	7
1769857398	26.37 °C	39.79 %	972.4 hPa	7
1769857338	26.37 °C	39.78 %	972.4 hPa	6
1769857278	26.36 °C	39.87 %	972.5 hPa	6
1769857219	26.35 °C	39.89 %	972.5 hPa	10
1769857158	26.34 °C	39.93 %	972.5 hPa	8

*Used Equation Coefficients:

Temperatu: 0, 0.01, 0

Humidity: 0, 0.01, 0

Pressure: 0, 0.1, 800

Battery: 0, 0.01, 0

Satellite: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)