This is the latest recevied telemetry packets stored in our database for station/object ED1YBG-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764936403 | 3.04 VDC | 11.78 VDC | 0 | 0 | 0 |
| 1764935201 | 3.1 VDC | 11.54 VDC | 0 | 0 | 0 |
| 1764934001 | 3.16 VDC | 11.32 VDC | 0 | 0 | 0 |
| 1764932800 | 3.21 VDC | 11.08 VDC | 0 | 0 | 0 |
| 1764931599 | 3.25 VDC | 11.44 VDC | 0 | 0 | 0 |
| 1764930399 | 3.29 VDC | 11.7 VDC | 0 | 0 | 0 |
| 1764929198 | 3.32 VDC | 11.58 VDC | 0 | 0 | 0 |
| 1764927997 | 3.35 VDC | 11.5 VDC | 0 | 0 | 0 |
| 1764926797 | 3.38 VDC | 11.34 VDC | 0 | 0 | 0 |
| 1764925596 | 3.4 VDC | 11.22 VDC | 0 | 0 | 0 |
| 1764924395 | 3.42 VDC | 11.06 VDC | 0 | 0 | 0 |
| 1764923195 | 3.43 VDC | 10.98 VDC | 0 | 0 | 0 |
| 1764921994 | 3.45 VDC | 6.42 VDC | 0 | 0 | 0 |
| 1764920796 | 3.46 VDC | 3.86 VDC | 0 | 0 | 0 |
| 1764919589 | 3.48 VDC | 1.38 VDC | 0 | 0 | 0 |
| 1764918388 | 3.49 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764917188 | 3.5 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764915987 | 3.51 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764914787 | 3.51 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764913586 | 3.52 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764912385 | 3.52 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764911185 | 3.53 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764909984 | 3.53 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764908783 | 3.53 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764907583 | 3.53 VDC | 0.66 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)