This is the latest recevied telemetry packets stored in our database for station/object ZR1SWB-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1737382510 | 7 | 789 C | 343 V | 14 M | 0 |
| 1737382209 | 9 | 790 C | 348 V | 15 M | 0 |
| 1737381909 | 9 | 791 C | 349 V | 14 M | 0 |
| 1737381609 | 9 | 789 C | 351 V | 13 M | 0 |
| 1737381309 | 9 | 791 C | 354 V | 14 M | 0 |
| 1737381009 | 9 | 792 C | 356 V | 14 M | 0 |
| 1737380709 | 9 | 793 C | 358 V | 15 M | 0 |
| 1737380409 | 9 | 793 C | 359 V | 14 M | 0 |
| 1737380109 | 10 | 792 C | 362 V | 15 M | 0 |
| 1737379810 | 9 | 791 C | 362 V | 15 M | 0 |
| 1737379508 | 9 | 791 C | 365 V | 15 M | 0 |
| 1737379208 | 9 | 791 C | 365 V | 14 M | 0 |
| 1737378909 | 8 | 793 C | 363 V | 15 M | 0 |
| 1737378608 | 8 | 795 C | 364 V | 15 M | 0 |
| 1737378307 | 8 | 794 C | 365 V | 14 M | 0 |
| 1737377708 | 8 | 797 C | 366 V | 14 M | 0 |
| 1737377527 | 7 | 796 C | 365 V | 14 M | 0 |
| 1737377102 | 7 | 796 C | 365 V | 14 M | 0 |
| 1737376503 | 8 | 793 C | 366 V | 15 M | 0 |
| 1737375902 | 8 | 793 C | 366 V | 15 M | 0 |
| 1737375302 | 8 | 790 C | 368 V | 15 M | 0 |
| 1737375002 | 9 | 791 C | 366 V | 14 M | 0 |
| 1737374702 | 9 | 793 C | 368 V | 15 M | 0 |
| 1737374402 | 10 | 791 C | 369 V | 15 M | 0 |
| 1737374102 | 10 | 793 C | 368 V | 14 M | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)