This is the latest recevied telemetry packets stored in our database for station/object AB0YS-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770331084 | 457 | 594 | 0 | 0 | 0 |
| 1770327398 | 480 | 604 | 0 | 0 | 0 |
| 1770327039 | 478 | 602 | 0 | 0 | 0 |
| 1770326920 | 480 | 601 | 0 | 0 | 0 |
| 1770326801 | 478 | 600 | 0 | 0 | 0 |
| 1770326681 | 479 | 599 | 0 | 0 | 0 |
| 1770326562 | 481 | 598 | 0 | 0 | 0 |
| 1770326442 | 481 | 597 | 0 | 0 | 0 |
| 1770325965 | 481 | 592 | 0 | 0 | 0 |
| 1770325845 | 481 | 590 | 0 | 0 | 0 |
| 1770325726 | 482 | 588 | 0 | 0 | 0 |
| 1770325606 | 479 | 586 | 0 | 0 | 0 |
| 1770325487 | 398 | 586 | 0 | 0 | 0 |
| 1770325070 | 478 | 586 | 0 | 0 | 0 |
| 1770324831 | 479 | 582 | 0 | 0 | 0 |
| 1770324592 | 388 | 577 | 0 | 0 | 0 |
| 1770319911 | 485 | 594 | 0 | 0 | 0 |
| 1770319792 | 485 | 593 | 0 | 0 | 0 |
| 1770319553 | 395 | 590 | 0 | 0 | 0 |
| 1770318449 | 479 | 601 | 0 | 0 | 0 |
| 1770318329 | 481 | 602 | 0 | 0 | 0 |
| 1770318091 | 483 | 601 | 0 | 0 | 0 |
| 1770317971 | 477 | 601 | 0 | 0 | 0 |
| 1770317732 | 483 | 600 | 0 | 0 | 0 |
| 1770317494 | 483 | 599 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)