This is the latest recevied telemetry packets stored in our database for station/object K3ORB. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1736725701 | 422 | 584 | 0 | 0 | 0 |
1736725581 | 423 | 584 | 0 | 0 | 0 |
1736725461 | 424 | 583 | 0 | 0 | 0 |
1736725342 | 425 | 583 | 0 | 0 | 0 |
1736725222 | 421 | 583 | 0 | 0 | 0 |
1736725102 | 494 | 583 | 0 | 0 | 0 |
1736724982 | 486 | 582 | 0 | 0 | 0 |
1736724862 | 488 | 581 | 0 | 0 | 0 |
1736724742 | 488 | 581 | 0 | 0 | 0 |
1736724623 | 487 | 579 | 0 | 0 | 0 |
1736724503 | 487 | 578 | 0 | 0 | 0 |
1736724383 | 488 | 576 | 0 | 0 | 0 |
1736724263 | 487 | 574 | 0 | 0 | 0 |
1736724143 | 503 | 570 | 0 | 0 | 0 |
1736723047 | 426 | 578 | 0 | 0 | 0 |
1736722927 | 427 | 577 | 0 | 0 | 0 |
1736722808 | 428 | 577 | 0 | 0 | 0 |
1736722688 | 428 | 577 | 0 | 0 | 0 |
1736722568 | 422 | 577 | 0 | 0 | 0 |
1736722209 | 490 | 575 | 0 | 0 | 0 |
1736722089 | 489 | 574 | 0 | 0 | 0 |
1736721969 | 489 | 573 | 0 | 0 | 0 |
1736721849 | 489 | 571 | 0 | 0 | 0 |
1736721729 | 487 | 569 | 0 | 0 | 0 |
1736721609 | 500 | 566 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)