This is the latest recevied telemetry packets stored in our database for station/object SP7THR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786402284 | 0 Count | 398 Count | 0 Count | 0 VDC | 0 VDC |
| 1786401084 | 0 Count | 388 Count | 0 Count | 0 VDC | 0 VDC |
| 1786399884 | 0 Count | 387 Count | 0 Count | 0 VDC | 0 VDC |
| 1786398684 | 0 Count | 385 Count | 0 Count | 0 VDC | 0 VDC |
| 1786397484 | 0 Count | 384 Count | 0 Count | 0 VDC | 0 VDC |
| 1786396284 | 0 Count | 383 Count | 0 Count | 0 VDC | 0 VDC |
| 1786395084 | 0 Count | 381 Count | 0 Count | 0 VDC | 0 VDC |
| 1786393884 | 0 Count | 380 Count | 0 Count | 0 VDC | 0 VDC |
| 1786392683 | 0 Count | 379 Count | 0 Count | 0 VDC | 0 VDC |
| 1786391483 | 0 Count | 374 Count | 0 Count | 0 VDC | 0 VDC |
| 1786390283 | 0 Count | 369 Count | 0 Count | 0 VDC | 0 VDC |
| 1786389083 | 0 Count | 367 Count | 0 Count | 0 VDC | 0 VDC |
| 1786387883 | 0 Count | 365 Count | 0 Count | 0 VDC | 0 VDC |
| 1786386683 | 0 Count | 364 Count | 0 Count | 0 VDC | 0 VDC |
| 1786385485 | 0 Count | 363 Count | 0 Count | 0 VDC | 0 VDC |
| 1786384284 | 0 Count | 360 Count | 0 Count | 0 VDC | 0 VDC |
| 1786383084 | 0 Count | 359 Count | 0 Count | 0 VDC | 0 VDC |
| 1786381884 | 0 Count | 358 Count | 0 Count | 0 VDC | 0 VDC |
| 1786380684 | 0 Count | 356 Count | 0 Count | 0 VDC | 0 VDC |
| 1786379484 | 0 Count | 355 Count | 0 Count | 0 VDC | 0 VDC |
| 1786378284 | 0 Count | 354 Count | 0 Count | 0 VDC | 0 VDC |
| 1786377084 | 0 Count | 352 Count | 0 Count | 0 VDC | 0 VDC |
| 1786375884 | 0 Count | 351 Count | 0 Count | 0 VDC | 0 VDC |
| 1786374684 | 0 Count | 350 Count | 0 Count | 0 VDC | 0 VDC |
| 1786373484 | 0 Count | 349 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)