This is the latest recevied telemetry packets stored in our database for station/object EA1PVC-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790031521 | 5.89 VDC | 0 | 0 | 0 | 0 |
| 1790030618 | 5.97 VDC | 0 | 0 | 0 | 0 |
| 1790029715 | 5.91 VDC | 0 | 0 | 0 | 0 |
| 1790028812 | 5.95 VDC | 0 | 0 | 0 | 0 |
| 1790027909 | 5.95 VDC | 0 | 0 | 0 | 0 |
| 1790027006 | 5.9 VDC | 0 | 0 | 0 | 0 |
| 1790026103 | 5.87 VDC | 0 | 0 | 0 | 0 |
| 1790025200 | 5.94 VDC | 0 | 0 | 0 | 0 |
| 1790024297 | 5.93 VDC | 0 | 0 | 0 | 0 |
| 1790023394 | 5.9 VDC | 0 | 0 | 0 | 0 |
| 1790022491 | 5.99 VDC | 0 | 0 | 0 | 0 |
| 1790021590 | 5.88 VDC | 0 | 0 | 0 | 0 |
| 1790020685 | 5.9 VDC | 0 | 0 | 0 | 0 |
| 1790019782 | 5.97 VDC | 0 | 0 | 0 | 0 |
| 1790018879 | 5.96 VDC | 0 | 0 | 0 | 0 |
| 1790017976 | 5.93 VDC | 0 | 0 | 0 | 0 |
| 1790017076 | 5.96 VDC | 0 | 0 | 0 | 0 |
| 1790016170 | 5.87 VDC | 0 | 0 | 0 | 0 |
| 1790015267 | 6 VDC | 0 | 0 | 0 | 0 |
| 1790014364 | 5.97 VDC | 0 | 0 | 0 | 0 |
| 1790013461 | 5.88 VDC | 0 | 0 | 0 | 0 |
| 1790012558 | 5.94 VDC | 0 | 0 | 0 | 0 |
| 1790011655 | 5.95 VDC | 0 | 0 | 0 | 0 |
| 1790010752 | 5.98 VDC | 0 | 0 | 0 | 0 |
| 1790009849 | 5.99 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)