This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1786451637 | 3.3 V | 0 V | 0 mW | 23.9 degC | 500 Pa |
| 1786451536 | 3.3 V | 0 V | 0 mW | 23.9 degC | 500 Pa |
| 1786451461 | 3.3 V | 0 V | 0 mW | 24.1 degC | 500 Pa |
| 1786449837 | 3.3 V | 0 V | 0 mW | 24 degC | 500 Pa |
| 1786449656 | 3.3 V | 0 V | 0 mW | 24 degC | 500 Pa |
| 1786448037 | 3.3 V | 0 V | 0 mW | 23.8 degC | 500 Pa |
| 1786447936 | 3.3 V | 0 V | 0 mW | 23.8 degC | 500 Pa |
| 1786447856 | 3.3 V | 0 V | 0 mW | 23.8 degC | 500 Pa |
| 1786446237 | 3.3 V | 0 V | 0 mW | 23.3 degC | 500 Pa |
| 1786446056 | 3.3 V | 0 V | 0 mW | 23.2 degC | 500 Pa |
| 1786444437 | 3.3 V | 0 V | 0 mW | 23.4 degC | 500 Pa |
| 1786444336 | 3.3 V | 0 V | 0 mW | 23.5 degC | 500 Pa |
| 1786444256 | 3.3 V | 0 V | 0 mW | 23.5 degC | 500 Pa |
| 1786442638 | 3.3 V | 0 V | 0 mW | 23.7 degC | 500 Pa |
| 1786442456 | 3.3 V | 0 V | 0 mW | 23.6 degC | 500 Pa |
| 1786440838 | 3.3 V | 0 V | 0 mW | 23.8 degC | 500 Pa |
| 1786440736 | 3.3 V | 0 V | 0 mW | 23.9 degC | 500 Pa |
| 1786440656 | 3.3 V | 0 V | 0 mW | 23.8 degC | 500 Pa |
| 1786439038 | 3.3 V | 0 V | 0 mW | 24.2 degC | 500 Pa |
| 1786438861 | 3.3 V | 0 V | 0 mW | 24.3 degC | 500 Pa |
| 1786437238 | 3.3 V | 0 V | 0 mW | 23.7 degC | 500 Pa |
| 1786437137 | 3.3 V | 0 V | 0 mW | 23.1 degC | 500 Pa |
| 1786437057 | 3.3 V | 0 V | 0 mW | 22.7 degC | 500 Pa |
| 1786436993 | 3.3 V | 0 V | 0 mW | 22.4 degC | 500 Pa |
| 1786436910 | 3.3 V | 0 V | 0 mW | 21.5 degC | 500 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)