This is the latest recevied telemetry packets stored in our database for station/object N7UV-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792722725 | 5.45 VDC | 0 | 0 | 0 | 0 |
| 1792721825 | 5.45 VDC | 0 | 0 | 0 | 0 |
| 1792720925 | 5.45 VDC | 0 | 0 | 0 | 0 |
| 1792720025 | 5.46 VDC | 0 | 0 | 0 | 0 |
| 1792718225 | 5.46 VDC | 0 | 0 | 0 | 0 |
| 1792716424 | 5.46 VDC | 0 | 0 | 0 | 0 |
| 1792715524 | 5.46 VDC | 0 | 0 | 0 | 0 |
| 1792714624 | 5.46 VDC | 0 | 0 | 0 | 0 |
| 1792713723 | 5.46 VDC | 0 | 0 | 0 | 0 |
| 1792712823 | 5.46 VDC | 0 | 0 | 0 | 0 |
| 1792711923 | 5.46 VDC | 0 | 0 | 0 | 0 |
| 1792711023 | 5.44 VDC | 0 | 0 | 0 | 0 |
| 1792710123 | 5.46 VDC | 0 | 0 | 0 | 0 |
| 1792709223 | 5.46 VDC | 0 | 0 | 0 | 0 |
| 1792708322 | 5.46 VDC | 0 | 0 | 0 | 0 |
| 1792707422 | 5.46 VDC | 0 | 0 | 0 | 0 |
| 1792706522 | 5.46 VDC | 0 | 0 | 0 | 0 |
| 1792705622 | 5.46 VDC | 0 | 0 | 0 | 0 |
| 1792704722 | 5.46 VDC | 0 | 0 | 0 | 0 |
| 1792703822 | 5.46 VDC | 0 | 0 | 0 | 0 |
| 1792702922 | 5.44 VDC | 0 | 0 | 0 | 0 |
| 1792702021 | 5.46 VDC | 0 | 0 | 0 | 0 |
| 1792701121 | 5.44 VDC | 0 | 0 | 0 | 0 |
| 1792700211 | 5.48 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)