This is the latest recevied telemetry packets stored in our database for station/object KF6YGK-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794330412 | 434 Volts | 628 Deg.F | 0 | 0 | 0 |
| 1794328619 | 428 Volts | 623 Deg.F | 0 | 0 | 0 |
| 1794326825 | 423 Volts | 619 Deg.F | 0 | 0 | 0 |
| 1794323243 | 417 Volts | 599 Deg.F | 0 | 0 | 0 |
| 1794319667 | 417 Volts | 591 Deg.F | 0 | 0 | 0 |
| 1794314303 | 417 Volts | 590 Deg.F | 0 | 0 | 0 |
| 1794308939 | 418 Volts | 590 Deg.F | 0 | 0 | 0 |
| 1794307151 | 419 Volts | 590 Deg.F | 0 | 0 | 0 |
| 1794298212 | 420 Volts | 594 Deg.F | 0 | 0 | 0 |
| 1794296423 | 420 Volts | 594 Deg.F | 0 | 0 | 0 |
| 1794294636 | 421 Volts | 594 Deg.F | 0 | 0 | 0 |
| 1794291059 | 421 Volts | 594 Deg.F | 0 | 0 | 0 |
| 1794289271 | 422 Volts | 595 Deg.F | 0 | 0 | 0 |
| 1794287484 | 422 Volts | 595 Deg.F | 0 | 0 | 0 |
| 1794283907 | 423 Volts | 596 Deg.F | 0 | 0 | 0 |
| 1794282119 | 423 Volts | 597 Deg.F | 0 | 0 | 0 |
| 1794278542 | 424 Volts | 600 Deg.F | 0 | 0 | 0 |
| 1794274963 | 424 Volts | 606 Deg.F | 0 | 0 | 0 |
| 1794273172 | 426 Volts | 609 Deg.F | 0 | 0 | 0 |
| 1794271382 | 426 Volts | 613 Deg.F | 0 | 0 | 0 |
| 1794269590 | 427 Volts | 618 Deg.F | 0 | 0 | 0 |
| 1794266003 | 433 Volts | 627 Deg.F | 0 | 0 | 0 |
| 1794262414 | 441 Volts | 632 Deg.F | 0 | 0 | 0 |
| 1794260618 | 448 Volts | 635 Deg.F | 0 | 0 | 0 |
| 1794258822 | 459 Volts | 636 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)