This is the latest recevied telemetry packets stored in our database for station/object VE6WDM-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1735583130 | 495 | 605 | 0 | 0 | 0 |
| 1735583092 | 495 | 603 | 0 | 0 | 0 |
| 1735582947 | 495 | 599 | 0 | 0 | 0 |
| 1735582827 | 496 | 595 | 0 | 0 | 0 |
| 1735582686 | 494 | 592 | 0 | 0 | 0 |
| 1735580382 | 497 | 622 | 0 | 0 | 0 |
| 1735580367 | 495 | 622 | 0 | 0 | 0 |
| 1735580352 | 496 | 621 | 0 | 0 | 0 |
| 1735580085 | 496 | 613 | 0 | 0 | 0 |
| 1735579846 | 495 | 602 | 0 | 0 | 0 |
| 1735579768 | 495 | 598 | 0 | 0 | 0 |
| 1735579751 | 495 | 597 | 0 | 0 | 0 |
| 1735579676 | 495 | 593 | 0 | 0 | 0 |
| 1735579591 | 496 | 588 | 0 | 0 | 0 |
| 1735579472 | 492 | 583 | 0 | 0 | 0 |
| 1735579431 | 492 | 581 | 0 | 0 | 0 |
| 1735579394 | 492 | 579 | 0 | 0 | 0 |
| 1735579274 | 492 | 575 | 0 | 0 | 0 |
| 1735579199 | 490 | 573 | 0 | 0 | 0 |
| 1735579181 | 489 | 572 | 0 | 0 | 0 |
| 1735575754 | 495 | 605 | 0 | 0 | 0 |
| 1735575639 | 497 | 601 | 0 | 0 | 0 |
| 1735575598 | 498 | 599 | 0 | 0 | 0 |
| 1735575538 | 497 | 597 | 0 | 0 | 0 |
| 1735575376 | 499 | 591 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)