This is the latest recevied telemetry packets stored in our database for station/object BG2VZP-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1773719822 | 9 | 352 | 1009 | 1152 | 0 |
| 1773713743 | 8 | 260 | 1010 | 1149 | 0 |
| 1773710708 | 9 | 211 | 1010 | 1149 | 0 |
| 1773707670 | 9 | 189 | 1010 | 1149 | 0 |
| 1773701549 | 9 | 167 | 1009 | 1149 | 0 |
| 1773698500 | 10 | 162 | 1009 | 1149 | 0 |
| 1773695457 | 9 | 153 | 1009 | 1149 | 0 |
| 1773692415 | 7 | 162 | 1009 | 1146 | 0 |
| 1773689371 | 9 | 163 | 1010 | 1152 | 0 |
| 1773686332 | 8 | 165 | 1010 | 1152 | 0 |
| 1773683290 | 7 | 165 | 1010 | 1146 | 0 |
| 1773680243 | 10 | 165 | 1011 | 1146 | 0 |
| 1773677194 | 7 | 167 | 1011 | 1149 | 0 |
| 1773674152 | 9 | 168 | 1011 | 1152 | 0 |
| 1773671105 | 9 | 176 | 1011 | 1152 | 0 |
| 1773668062 | 11 | 179 | 1011 | 1146 | 0 |
| 1773665020 | 10 | 186 | 1011 | 1149 | 0 |
| 1773661972 | 10 | 190 | 1011 | 1149 | 0 |
| 1773658919 | 11 | 196 | 1010 | 1149 | 0 |
| 1773652794 | 9 | 234 | 1010 | 1149 | 0 |
| 1773649769 | 11 | 284 | 1010 | 1149 | 0 |
| 1773646761 | 11 | 331 | 1011 | 1149 | 0 |
| 1773637655 | 11 | 258 | 1013 | 1149 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)