This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUMID* | PRESSURE* | SAT* | HDOP* |
|---|---|---|---|---|---|
| 1773401219 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773400603 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773400297 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773399991 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773399682 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773399072 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773398761 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773398454 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773398148 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773397839 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773397533 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773397227 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773396918 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773396612 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773396306 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773395997 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773395692 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773395386 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773395076 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773394770 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773394155 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773393848 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773393542 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773393233 | 0 °C | 0 % | 0 mBar | 0 | 0 |
| 1773392927 | 0 °C | 0 % | 0 mBar | 0 | 0 |
*Used Equation Coefficients:
TEMP: 0, 1, 0
HUMID: 0, 1, 0
PRESSURE: 0, 1, 0
SAT: 0, 1, 0
HDOP: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)