This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786412564 | 3.46 VDC | 1 VDC | 0 | 0 | 0 |
| 1786411363 | 3.46 VDC | 1 VDC | 0 | 0 | 0 |
| 1786410163 | 3.46 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1786408961 | 3.46 VDC | 1 VDC | 0 | 0 | 0 |
| 1786407761 | 3.46 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1786406560 | 3.47 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1786405359 | 3.46 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1786402941 | 3.48 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1786401769 | 3.47 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1786400568 | 3.47 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1786399367 | 3.47 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1786398166 | 3.47 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1786396965 | 3.48 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1786394564 | 3.48 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1786393364 | 3.48 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1786392164 | 3.48 VDC | 0.88 VDC | 0 | 0 | 0 |
| 1786390962 | 3.49 VDC | 0.88 VDC | 0 | 0 | 0 |
| 1786389762 | 3.49 VDC | 0.88 VDC | 0 | 0 | 0 |
| 1786388561 | 3.49 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1786387360 | 3.49 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1786386160 | 3.49 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1786384959 | 3.5 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1786383758 | 3.5 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1786381340 | 3.48 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1786380168 | 3.47 VDC | 0.84 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)