This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | SAT NUM* | HDOP* | TEMP* | HUMIDITY* | PRESSURE* |
|---|---|---|---|---|---|
| 1773763426 | 8 SAT | 0 DOP | 39 C | 35 % | 1008 mBAR |
| 1773762205 | 8 SAT | 1 DOP | 39 C | 34 % | 1008 mBAR |
| 1773760985 | 8 SAT | 0 DOP | 39 C | 34 % | 1008 mBAR |
| 1773759769 | 6 SAT | 1 DOP | 40 C | 33 % | 1008 mBAR |
| 1773758548 | 6 SAT | 1 DOP | 40 C | 33 % | 1008 mBAR |
| 1773757327 | 7 SAT | 1 DOP | 40 C | 33 % | 1008 mBAR |
| 1773756111 | 7 SAT | 1 DOP | 40 C | 33 % | 1008 mBAR |
| 1773754890 | 7 SAT | 1 DOP | 40 C | 32 % | 1007 mBAR |
| 1773753670 | 8 SAT | 1 DOP | 40 C | 31 % | 1007 mBAR |
| 1773752454 | 8 SAT | 0 DOP | 40 C | 31 % | 1007 mBAR |
| 1773751233 | 8 SAT | 0 DOP | 40 C | 31 % | 1006 mBAR |
| 1773739411 | 10 SAT | 0 DOP | 41 C | 28 % | 1003 mBAR |
| 1773738195 | 9 SAT | 1 DOP | 41 C | 29 % | 1003 mBAR |
| 1773736973 | 10 SAT | 0 DOP | 41 C | 29 % | 1003 mBAR |
| 1773735753 | 9 SAT | 0 DOP | 41 C | 29 % | 1003 mBAR |
| 1773734536 | 10 SAT | 0 DOP | 41 C | 29 % | 1003 mBAR |
| 1773733317 | 8 SAT | 1 DOP | 41 C | 29 % | 1004 mBAR |
| 1773732096 | 9 SAT | 1 DOP | 41 C | 29 % | 1004 mBAR |
| 1773730879 | 8 SAT | 1 DOP | 41 C | 30 % | 1004 mBAR |
| 1773729658 | 9 SAT | 1 DOP | 40 C | 29 % | 1004 mBAR |
| 1773728437 | 9 SAT | 1 DOP | 41 C | 28 % | 1005 mBAR |
| 1773727221 | 10 SAT | 0 DOP | 41 C | 27 % | 1005 mBAR |
| 1773725999 | 9 SAT | 1 DOP | 41 C | 27 % | 1005 mBAR |
| 1773724779 | 9 SAT | 1 DOP | 41 C | 27 % | 1006 mBAR |
| 1773723562 | 11 SAT | 0 DOP | 41 C | 27 % | 1006 mBAR |
*Used Equation Coefficients:
SAT NUM: 0, 1, 0
HDOP: 0, 1, 0
TEMP: 0, 1, 0
HUMIDITY: 0, 1, 0
PRESSURE: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)