This is the latest recevied telemetry packets stored in our database for station/object WB8ELK-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Solar* | Temp* | Sats* | Lock* | Value5* |
|---|---|---|---|---|---|
| 1736460064 | 3.28 Volts | -2 Deg C | 10 | 6 | 1 |
| 1736459938 | 3.28 Volts | -4 Deg C | 10 | 6 | 1 |
| 1736459812 | 3.28 Volts | 4 Deg C | 10 | 1 | 1 |
| 1736459683 | 3.28 Volts | -15 Deg C | 10 | 1 | 1 |
| 1736459554 | 3.28 Volts | -13 Deg C | 10 | 1 | 1 |
| 1736459425 | 3.28 Volts | 7 Deg C | 10 | 1 | 1 |
| 1736459296 | 3.28 Volts | -1 Deg C | 10 | 1 | 1 |
| 1736459167 | 3.4 Volts | -2 Deg C | 10 | 1 | 1 |
| 1736459035 | 3.26 Volts | -2 Deg C | 10 | 1 | 1 |
| 1736458903 | 3.28 Volts | -9 Deg C | 10 | 1 | 1 |
| 1736458771 | 3.28 Volts | -2 Deg C | 10 | 1 | 1 |
| 1736458642 | 3.74 Volts | 4 Deg C | 9 | 6 | 1 |
| 1736458522 | 3.48 Volts | 4 Deg C | 9 | 6 | 1 |
| 1736458393 | 3.68 Volts | 5 Deg C | 8 | 1 | 1 |
| 1736458258 | 3.46 Volts | 0 Deg C | 9 | 6 | 1 |
| 1736458129 | 3.56 Volts | -5 Deg C | 9 | 1 | 1 |
| 1736458000 | 3.76 Volts | -6 Deg C | 9 | 1 | 1 |
| 1736457874 | 3.64 Volts | -1 Deg C | 9 | 6 | 1 |
| 1736457748 | 3.78 Volts | -5 Deg C | 9 | 1 | 1 |
| 1736457622 | 3.7 Volts | 4 Deg C | 9 | 1 | 1 |
| 1736457496 | 3.94 Volts | 4 Deg C | 9 | 1 | 1 |
| 1736457370 | 3.78 Volts | 2 Deg C | 9 | 1 | 1 |
| 1736457244 | 3.96 Volts | 6 Deg C | 9 | 6 | 1 |
| 1736457112 | 3.88 Volts | -2 Deg C | 10 | 1 | 1 |
| 1736456986 | 4.12 Volts | 2 Deg C | 10 | 6 | 1 |
*Used Equation Coefficients:
Solar: 0, 0.01, 0
Temp: 0, 1, -273
Sats: 0, 1, 0
Lock: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)