This is the latest recevied telemetry packets stored in our database for station/object WB6CDF. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1735172094 | 490 | 0 | 0 | 0 | 0 |
| 1735172022 | 468 | 0 | 0 | 0 | 0 |
| 1735171918 | 467 | 0 | 0 | 0 | 0 |
| 1735171820 | 464 | 0 | 0 | 0 | 0 |
| 1735171648 | 465 | 0 | 0 | 0 | 0 |
| 1735171609 | 463 | 0 | 0 | 0 | 0 |
| 1735168933 | 462 | 0 | 0 | 0 | 0 |
| 1735168711 | 465 | 0 | 0 | 0 | 0 |
| 1735168556 | 408 | 0 | 0 | 0 | 0 |
| 1735167839 | 457 | 0 | 0 | 0 | 0 |
| 1735167681 | 479 | 0 | 0 | 0 | 0 |
| 1735167644 | 475 | 0 | 0 | 0 | 0 |
| 1735167525 | 459 | 0 | 0 | 0 | 0 |
| 1735167436 | 462 | 0 | 0 | 0 | 0 |
| 1735167372 | 465 | 0 | 0 | 0 | 0 |
| 1735167330 | 473 | 0 | 0 | 0 | 0 |
| 1735167277 | 470 | 0 | 0 | 0 | 0 |
| 1735167264 | 459 | 0 | 0 | 0 | 0 |
| 1735167201 | 487 | 0 | 0 | 0 | 0 |
| 1735167192 | 484 | 0 | 0 | 0 | 0 |
| 1735167178 | 469 | 0 | 0 | 0 | 0 |
| 1735166907 | 465 | 0 | 0 | 0 | 0 |
| 1735166819 | 458 | 0 | 0 | 0 | 0 |
| 1735166797 | 467 | 0 | 0 | 0 | 0 |
| 1735166626 | 461 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)