This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | HDOP* | SAT* | TEMP* | HUMID* | PRESSURE* |
|---|---|---|---|---|---|
| 1736796310 | 2 DOP | 4 SAT | 36 °C | 48 % | 999 mBar |
| 1736796010 | 13 DOP | 4 SAT | 36 °C | 48 % | 999 mBar |
| 1736795710 | 1 DOP | 4 SAT | 36 °C | 47 % | 999 mBar |
| 1736795410 | 99 DOP | 0 SAT | 37 °C | 47 % | 999 mBar |
| 1736795403 | 99 DOP | 0 SAT | 37 °C | 47 % | 999 mBar |
| 1736795213 | 99 DOP | 0 SAT | 36 °C | 48 % | 999 mBar |
| 1736794913 | 99 DOP | 0 SAT | 36 °C | 48 % | 999 mBar |
| 1736794613 | 99 DOP | 0 SAT | 35 °C | 49 % | 999 mBar |
| 1736794313 | 99 DOP | 0 SAT | 35 °C | 50 % | 999 mBar |
*Used Equation Coefficients:
HDOP: 0, 1, 0
SAT: 0, 1, 0
TEMP: 0, 1, 0
HUMID: 0, 1, 0
PRESSURE: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)