This is the latest recevied telemetry packets stored in our database for station/object XE2J-26. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1772524024 | 4.06 VDC | 0 | 0 | 0 | 0 |
| 1772523122 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 1772522219 | 4.12 VDC | 0 | 0 | 0 | 0 |
| 1772521316 | 4.12 VDC | 0 | 0 | 0 | 0 |
| 1772520413 | 4.12 VDC | 0 | 0 | 0 | 0 |
| 1772519510 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1772518607 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1772517704 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1772516801 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1772514092 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1772513189 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1772512286 | 4.14 VDC | 0 | 0 | 0 | 0 |
| 1772511383 | 4.14 VDC | 0 | 0 | 0 | 0 |
| 1772510480 | 4.14 VDC | 0 | 0 | 0 | 0 |
| 1772509577 | 4.14 VDC | 0 | 0 | 0 | 0 |
| 1772508674 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1772507771 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 1772506868 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1772505965 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1772505062 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1772504159 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1772503256 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1772502353 | 4.12 VDC | 0 | 0 | 0 | 0 |
| 1772501450 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1772500547 | 4.06 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)