This is the latest recevied telemetry packets stored in our database for station/object EA4FKJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780192658 | 0 Count | 931 Count | 0 Count | 0 VDC | 0 VDC |
| 1780190858 | 0 Count | 909 Count | 0 Count | 0 VDC | 0 VDC |
| 1780189060 | 0 Count | 890 Count | 0 Count | 0 VDC | 0 VDC |
| 1780187260 | 0 Count | 870 Count | 0 Count | 0 VDC | 0 VDC |
| 1780185460 | 0 Count | 846 Count | 0 Count | 0 VDC | 0 VDC |
| 1780183660 | 0 Count | 807 Count | 0 Count | 0 VDC | 0 VDC |
| 1780181860 | 0 Count | 778 Count | 0 Count | 0 VDC | 0 VDC |
| 1780180060 | 0 Count | 758 Count | 0 Count | 0 VDC | 0 VDC |
| 1780178259 | 0 Count | 737 Count | 0 Count | 0 VDC | 0 VDC |
| 1780176459 | 0 Count | 712 Count | 0 Count | 0 VDC | 0 VDC |
| 1780174658 | 0 Count | 692 Count | 0 Count | 0 VDC | 0 VDC |
| 1780172858 | 0 Count | 668 Count | 0 Count | 0 VDC | 0 VDC |
| 1780171058 | 0 Count | 650 Count | 0 Count | 0 VDC | 0 VDC |
| 1780169258 | 0 Count | 630 Count | 0 Count | 0 VDC | 0 VDC |
| 1780165683 | 0 Count | 597 Count | 0 Count | 0 VDC | 0 VDC |
| 1780163883 | 0 Count | 575 Count | 0 Count | 0 VDC | 0 VDC |
| 1780162083 | 0 Count | 552 Count | 0 Count | 0 VDC | 0 VDC |
| 1780160283 | 0 Count | 522 Count | 0 Count | 0 VDC | 0 VDC |
| 1780145857 | 0 Count | 345 Count | 0 Count | 0 VDC | 0 VDC |
| 1780144057 | 0 Count | 313 Count | 0 Count | 0 VDC | 0 VDC |
| 1780142257 | 0 Count | 292 Count | 0 Count | 0 VDC | 0 VDC |
| 1780138657 | 0 Count | 247 Count | 0 Count | 0 VDC | 0 VDC |
| 1780136857 | 0 Count | 227 Count | 0 Count | 0 VDC | 0 VDC |
| 1780135056 | 0 Count | 212 Count | 0 Count | 0 VDC | 0 VDC |
| 1780133256 | 0 Count | 194 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)