This is the latest recevied telemetry packets stored in our database for station/object KN6PHW. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786399467 | 36.09 | 39.46 | -2.08 | 0 | 0 |
| 1786398269 | 43.02 | 40.31 | -2.08 | 0 | 0 |
| 1786398148 | 35.73 | 40.25 | -2.08 | 0 | 0 |
| 1786398028 | 35.73 | 40.31 | -2.08 | 0 | 0 |
| 1786397668 | 35.73 | 40.25 | -2.08 | 0 | 0 |
| 1786397308 | 35.73 | 40.25 | -2.08 | 0 | 0 |
| 1786397188 | 35.73 | 40.25 | -2.08 | 0 | 0 |
| 1786397068 | 35.73 | 40.25 | -2.08 | 0 | 0 |
| 1786396589 | 35.64 | 40.19 | -2.08 | 0 | 0 |
| 1786396229 | 35.73 | 40.19 | -2.08 | 0 | 0 |
| 1786395989 | 35.73 | 40.19 | -2.08 | 0 | 0 |
| 1786395629 | 35.73 | 40.13 | -2.08 | 0 | 0 |
| 1786395269 | 35.73 | 40.13 | -2.08 | 0 | 0 |
| 1786395149 | 35.73 | 40.13 | -2.08 | 0 | 0 |
| 1786394789 | 35.73 | 40.07 | -2.08 | 0 | 0 |
| 1786394310 | 35.73 | 40.07 | -2.08 | 0 | 0 |
| 1786394070 | 35.73 | 40.07 | -2.08 | 0 | 0 |
| 1786393710 | 35.73 | 40.01 | -2.08 | 0 | 0 |
| 1786393230 | 35.73 | 40.01 | -2.08 | 0 | 0 |
| 1786392871 | 35.73 | 39.95 | -2.08 | 0 | 0 |
| 1786392151 | 35.64 | 39.95 | -2.08 | 0 | 0 |
| 1786391672 | 35.73 | 39.82 | -2.08 | 0 | 0 |
| 1786390833 | 35.73 | 39.82 | -2.08 | 0 | 0 |
| 1786390353 | 35.64 | 39.76 | -2.08 | 0 | 0 |
| 1786390233 | 35.64 | 39.76 | -2.08 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.09, 0
Value2: 0, 0.0608, 0
Value3: 0, 0.0215, -2.08
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)