This is the latest recevied telemetry packets stored in our database for station/object SR9VJK-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790332928 | 0 Count | 599 Count | 0 Count | 0 VDC | 0 VDC |
| 1790311329 | 0 Count | 344 Count | 0 Count | 0 VDC | 0 VDC |
| 1790309529 | 0 Count | 234 Count | 0 Count | 0 VDC | 0 VDC |
| 1790307727 | 0 Count | 115 Count | 0 Count | 0 VDC | 0 VDC |
| 1790305927 | 0 Count | 1067 Count | 0 Count | 0 VDC | 0 VDC |
| 1790304127 | 0 Count | 944 Count | 0 Count | 0 VDC | 0 VDC |
| 1790302327 | 0 Count | 803 Count | 0 Count | 0 VDC | 0 VDC |
| 1790300527 | 0 Count | 695 Count | 0 Count | 0 VDC | 0 VDC |
| 1790298727 | 0 Count | 591 Count | 0 Count | 0 VDC | 0 VDC |
| 1790296927 | 0 Count | 471 Count | 0 Count | 0 VDC | 0 VDC |
| 1790295127 | 0 Count | 354 Count | 0 Count | 0 VDC | 0 VDC |
| 1790293327 | 0 Count | 259 Count | 0 Count | 0 VDC | 0 VDC |
| 1790291526 | 0 Count | 173 Count | 0 Count | 0 VDC | 0 VDC |
| 1790289726 | 0 Count | 89 Count | 0 Count | 0 VDC | 0 VDC |
| 1790287926 | 0 Count | 1011 Count | 0 Count | 0 VDC | 0 VDC |
| 1790286126 | 0 Count | 928 Count | 0 Count | 0 VDC | 0 VDC |
| 1790284326 | 0 Count | 850 Count | 0 Count | 0 VDC | 0 VDC |
| 1790282526 | 0 Count | 778 Count | 0 Count | 0 VDC | 0 VDC |
| 1790280726 | 0 Count | 687 Count | 0 Count | 0 VDC | 0 VDC |
| 1790278926 | 0 Count | 617 Count | 0 Count | 0 VDC | 0 VDC |
| 1790277126 | 0 Count | 530 Count | 0 Count | 0 VDC | 0 VDC |
| 1790275325 | 0 Count | 453 Count | 0 Count | 0 VDC | 0 VDC |
| 1790273525 | 0 Count | 366 Count | 0 Count | 0 VDC | 0 VDC |
| 1790271725 | 0 Count | 285 Count | 0 Count | 0 VDC | 0 VDC |
| 1790269925 | 0 Count | 183 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)