This is the latest recevied telemetry packets stored in our database for station/object OZ1ANE-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1735220920 | 475 | 605 | 0 | 0 | 0 |
| 1735220832 | 474 | 605 | 0 | 0 | 0 |
| 1735220467 | 476 | 603 | 0 | 0 | 0 |
| 1735220368 | 475 | 603 | 0 | 0 | 0 |
| 1735220285 | 476 | 602 | 0 | 0 | 0 |
| 1735220221 | 478 | 602 | 0 | 0 | 0 |
| 1735220170 | 477 | 601 | 0 | 0 | 0 |
| 1735219818 | 470 | 596 | 0 | 0 | 0 |
| 1735219802 | 474 | 594 | 0 | 0 | 0 |
| 1735219769 | 470 | 596 | 0 | 0 | 0 |
| 1735219754 | 473 | 595 | 0 | 0 | 0 |
| 1735219695 | 474 | 594 | 0 | 0 | 0 |
| 1735208331 | 482 | 607 | 0 | 0 | 0 |
| 1735208273 | 483 | 607 | 0 | 0 | 0 |
| 1735208207 | 478 | 606 | 0 | 0 | 0 |
| 1735208184 | 483 | 605 | 0 | 0 | 0 |
| 1735208085 | 481 | 605 | 0 | 0 | 0 |
| 1735208035 | 482 | 604 | 0 | 0 | 0 |
| 1735207817 | 485 | 603 | 0 | 0 | 0 |
| 1735207736 | 483 | 602 | 0 | 0 | 0 |
| 1735207669 | 483 | 602 | 0 | 0 | 0 |
| 1735207578 | 482 | 602 | 0 | 0 | 0 |
| 1735207441 | 483 | 601 | 0 | 0 | 0 |
| 1735207180 | 482 | 598 | 0 | 0 | 0 |
| 1735207117 | 483 | 598 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)