This is the latest recevied telemetry packets stored in our database for station/object GW3ATZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780211232 | 303 Count | 581 Count | 223 Count | 4.25 VDC | 0.16 VDC |
| 1780209424 | 296 Count | 571 Count | 218 Count | 4.2 VDC | 0.16 VDC |
| 1780207616 | 289 Count | 560 Count | 213 Count | 4.25 VDC | 0.14 VDC |
| 1780205807 | 283 Count | 553 Count | 209 Count | 4.24 VDC | 0.14 VDC |
| 1780203999 | 276 Count | 543 Count | 204 Count | 4.22 VDC | 0.14 VDC |
| 1780202191 | 268 Count | 536 Count | 198 Count | 4.26 VDC | 0.14 VDC |
| 1780200479 | 261 Count | 529 Count | 193 Count | 4.25 VDC | 0.14 VDC |
| 1780198671 | 253 Count | 523 Count | 187 Count | 4.25 VDC | 0.14 VDC |
| 1780196863 | 245 Count | 515 Count | 181 Count | 4.2 VDC | 0.14 VDC |
| 1780195055 | 239 Count | 503 Count | 177 Count | 4.25 VDC | 0.14 VDC |
| 1780193247 | 231 Count | 483 Count | 171 Count | 4.26 VDC | 0.14 VDC |
| 1780191439 | 225 Count | 466 Count | 167 Count | 4.21 VDC | 0.14 VDC |
| 1780189631 | 217 Count | 452 Count | 161 Count | 4.21 VDC | 0.14 VDC |
| 1780187822 | 209 Count | 441 Count | 155 Count | 4.22 VDC | 0.14 VDC |
| 1780186014 | 202 Count | 426 Count | 150 Count | 4.25 VDC | 0.14 VDC |
| 1780184206 | 194 Count | 414 Count | 144 Count | 4.23 VDC | 0.14 VDC |
| 1780182398 | 185 Count | 399 Count | 137 Count | 4.24 VDC | 0.14 VDC |
| 1780180589 | 177 Count | 378 Count | 131 Count | 4.26 VDC | 0.14 VDC |
| 1780178880 | 170 Count | 358 Count | 126 Count | 4.23 VDC | 0.14 VDC |
| 1780177071 | 162 Count | 340 Count | 120 Count | 4.26 VDC | 0.14 VDC |
| 1780175263 | 154 Count | 321 Count | 114 Count | 4.23 VDC | 0.14 VDC |
| 1780173455 | 146 Count | 305 Count | 108 Count | 4.21 VDC | 0.14 VDC |
| 1780171647 | 138 Count | 288 Count | 102 Count | 4.2 VDC | 0.14 VDC |
| 1780169838 | 130 Count | 272 Count | 96 Count | 4.25 VDC | 0.14 VDC |
| 1780168030 | 121 Count | 255 Count | 89 Count | 4.23 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)