This is the latest recevied telemetry packets stored in our database for station/object VK2IBA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1735363196 | 463 | 680 | 0 | 0 | 0 |
| 1735363176 | 461 | 681 | 0 | 0 | 0 |
| 1735363162 | 466 | 681 | 0 | 0 | 0 |
| 1735363153 | 468 | 681 | 0 | 0 | 0 |
| 1735362996 | 465 | 691 | 0 | 0 | 0 |
| 1735362970 | 461 | 692 | 0 | 0 | 0 |
| 1735362906 | 461 | 693 | 0 | 0 | 0 |
| 1735362894 | 461 | 693 | 0 | 0 | 0 |
| 1735362637 | 465 | 691 | 0 | 0 | 0 |
| 1735362632 | 467 | 691 | 0 | 0 | 0 |
| 1735362499 | 447 | 689 | 0 | 0 | 0 |
| 1735362430 | 463 | 685 | 0 | 0 | 0 |
| 1735362414 | 463 | 684 | 0 | 0 | 0 |
| 1735361614 | 466 | 686 | 0 | 0 | 0 |
| 1735361436 | 463 | 683 | 0 | 0 | 0 |
| 1735361417 | 462 | 684 | 0 | 0 | 0 |
| 1735361333 | 465 | 686 | 0 | 0 | 0 |
| 1735361323 | 463 | 686 | 0 | 0 | 0 |
| 1735361285 | 465 | 686 | 0 | 0 | 0 |
| 1735361189 | 462 | 683 | 0 | 0 | 0 |
| 1735361152 | 463 | 682 | 0 | 0 | 0 |
| 1735361142 | 462 | 681 | 0 | 0 | 0 |
| 1735361106 | 454 | 680 | 0 | 0 | 0 |
| 1735360115 | 466 | 682 | 0 | 0 | 0 |
| 1735360111 | 465 | 682 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)