This is the latest recevied telemetry packets stored in our database for station/object E25PHR-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU* | Satellite* | HDOP* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782634358 | 42 °C | 9 | 0 | 0 | 0 |
| 1782634210 | 42 °C | 10 | 0 | 0 | 0 |
| 1782633673 | 41 °C | 10 | 0 | 0 | 0 |
| 1782633564 | 37 °C | 9 | 0 | 0 | 0 |
| 1782633517 | 41 °C | 9 | 0 | 0 | 0 |
| 1782633460 | 41 °C | 8 | 0 | 0 | 0 |
| 1782633421 | 41 °C | 8 | 0 | 0 | 0 |
| 1782633348 | 41 °C | 9 | 0 | 0 | 0 |
| 1782633282 | 41 °C | 9 | 0 | 0 | 0 |
| 1782633248 | 41 °C | 9 | 0 | 0 | 0 |
| 1782633231 | 41 °C | 9 | 0 | 0 | 0 |
| 1782633195 | 41 °C | 9 | 0 | 0 | 0 |
| 1782633178 | 41 °C | 9 | 0 | 0 | 0 |
| 1782633141 | 41 °C | 9 | 0 | 0 | 0 |
| 1782633106 | 41 °C | 8 | 0 | 0 | 0 |
| 1782633067 | 41 °C | 8 | 0 | 0 | 0 |
| 1782633016 | 41 °C | 8 | 0 | 0 | 0 |
| 1782632940 | 40 °C | 9 | 0 | 0 | 0 |
| 1782632883 | 40 °C | 9 | 0 | 0 | 0 |
| 1782632847 | 40 °C | 9 | 0 | 0 | 0 |
| 1782632810 | 36 °C | 9 | 0 | 0 | 0 |
| 1782632794 | 37 °C | 9 | 0 | 0 | 0 |
| 1782632775 | 37 °C | 9 | 0 | 0 | 0 |
| 1782632705 | 40 °C | 9 | 0 | 0 | 0 |
| 1782632669 | 40 °C | 8 | 0 | 0 | 0 |
*Used Equation Coefficients:
CPU: 0, 1, 0
Satellite: 0, 1, 0
HDOP: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)