This is the latest recevied telemetry packets stored in our database for station/object M5MOW-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786407858 | 4 | 737 | 425 | 9 | 0 |
| 1786407677 | 5 | 739 | 427 | 7 | 0 |
| 1786407496 | 3 | 741 | 434 | 14 | 0 |
| 1786407315 | 4 | 739 | 426 | 12 | 0 |
| 1786407134 | 5 | 740 | 426 | 13 | 0 |
| 1786406953 | 5 | 742 | 426 | 10 | 0 |
| 1786406772 | 6 | 745 | 435 | 10 | 0 |
| 1786406591 | 7 | 741 | 426 | 12 | 0 |
| 1786406410 | 6 | 743 | 427 | 12 | 0 |
| 1786406229 | 8 | 746 | 434 | 14 | 0 |
| 1786406048 | 7 | 742 | 425 | 14 | 0 |
| 1786405867 | 6 | 743 | 425 | 15 | 0 |
| 1786405505 | 7 | 746 | 428 | 13 | 0 |
| 1786405324 | 7 | 750 | 435 | 13 | 0 |
| 1786405143 | 8 | 745 | 425 | 12 | 0 |
| 1786404962 | 8 | 746 | 426 | 18 | 0 |
| 1786404781 | 6 | 748 | 427 | 11 | 0 |
| 1786404600 | 7 | 751 | 435 | 10 | 0 |
| 1786404420 | 5 | 749 | 427 | 10 | 0 |
| 1786404238 | 7 | 753 | 435 | 9 | 0 |
| 1786404057 | 7 | 748 | 425 | 9 | 0 |
| 1786403876 | 6 | 750 | 427 | 9 | 0 |
| 1786403695 | 7 | 752 | 434 | 11 | 0 |
| 1786403333 | 6 | 750 | 426 | 10 | 0 |
| 1786403152 | 6 | 752 | 426 | 10 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)