This is the latest recevied telemetry packets stored in our database for station/object KB0ZTX-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780170871 | 455 | 639 | 0 | 0 | 0 |
| 1780170752 | 460 | 641 | 0 | 0 | 0 |
| 1780170513 | 463 | 645 | 0 | 0 | 0 |
| 1780170393 | 460 | 645 | 0 | 0 | 0 |
| 1780170274 | 459 | 645 | 0 | 0 | 0 |
| 1780170154 | 453 | 642 | 0 | 0 | 0 |
| 1780164573 | 457 | 632 | 0 | 0 | 0 |
| 1780164453 | 457 | 633 | 0 | 0 | 0 |
| 1780164334 | 456 | 633 | 0 | 0 | 0 |
| 1780164214 | 462 | 632 | 0 | 0 | 0 |
| 1780164095 | 443 | 630 | 0 | 0 | 0 |
| 1780158025 | 459 | 636 | 0 | 0 | 0 |
| 1780157906 | 459 | 636 | 0 | 0 | 0 |
| 1780157786 | 459 | 637 | 0 | 0 | 0 |
| 1780157666 | 458 | 637 | 0 | 0 | 0 |
| 1780157547 | 457 | 637 | 0 | 0 | 0 |
| 1780157427 | 459 | 635 | 0 | 0 | 0 |
| 1780157308 | 458 | 633 | 0 | 0 | 0 |
| 1780157188 | 457 | 630 | 0 | 0 | 0 |
| 1780146023 | 475 | 608 | 0 | 0 | 0 |
| 1780145786 | 472 | 611 | 0 | 0 | 0 |
| 1780145666 | 475 | 613 | 0 | 0 | 0 |
| 1780145546 | 475 | 615 | 0 | 0 | 0 |
| 1780145307 | 468 | 615 | 0 | 0 | 0 |
| 1780145187 | 471 | 612 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)