This is the latest recevied telemetry packets stored in our database for station/object VE2NZR-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1735188240 | 477 | 0 | 0 | 0 | 0 |
| 1735188018 | 477 | 0 | 0 | 0 | 0 |
| 1735187924 | 482 | 0 | 0 | 0 | 0 |
| 1735187520 | 482 | 0 | 0 | 0 | 0 |
| 1735187485 | 475 | 0 | 0 | 0 | 0 |
| 1735187354 | 482 | 0 | 0 | 0 | 0 |
| 1735187249 | 482 | 0 | 0 | 0 | 0 |
| 1735187122 | 479 | 0 | 0 | 0 | 0 |
| 1735186990 | 484 | 0 | 0 | 0 | 0 |
| 1735186613 | 480 | 0 | 0 | 0 | 0 |
| 1735162164 | 472 | 0 | 0 | 0 | 0 |
| 1735162158 | 472 | 0 | 0 | 0 | 0 |
| 1735162137 | 469 | 0 | 0 | 0 | 0 |
| 1735162119 | 476 | 0 | 0 | 0 | 0 |
| 1735162080 | 477 | 0 | 0 | 0 | 0 |
| 1735161844 | 472 | 0 | 0 | 0 | 0 |
| 1735161417 | 475 | 0 | 0 | 0 | 0 |
| 1735161411 | 481 | 0 | 0 | 0 | 0 |
| 1735161404 | 472 | 0 | 0 | 0 | 0 |
| 1735161391 | 472 | 0 | 0 | 0 | 0 |
| 1735161304 | 469 | 0 | 0 | 0 | 0 |
| 1735160824 | 481 | 0 | 0 | 0 | 0 |
| 1735160799 | 473 | 0 | 0 | 0 | 0 |
| 1735146136 | 474 | 0 | 0 | 0 | 0 |
| 1735146058 | 473 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)