PenangAPRS Track

My position About ☰

reset

VK2LJ-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2LJ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Temp*
1786429424	13.33 Volts	17.32 Deg.C
1786428825	13.33 Volts	17.81 Deg.C
1786427926	13.33 Volts	17.81 Deg.C
1786427335	13.33 Volts	17.32 Deg.C
1786427028	13.33 Volts	17.81 Deg.C
1786426130	13.33 Volts	17.81 Deg.C
1786425531	13.36 Volts	17.81 Deg.C
1786425232	13.36 Volts	17.81 Deg.C
1786424932	13.42 Volts	17.81 Deg.C
1786424034	13.42 Volts	17.81 Deg.C
1786423735	13.36 Volts	17.81 Deg.C
1786423435	13.33 Volts	17.81 Deg.C
1786423136	13.33 Volts	17.81 Deg.C
1786422836	13.36 Volts	17.81 Deg.C
1786422538	13.36 Volts	17.81 Deg.C
1786420741	13.42 Volts	17.81 Deg.C
1786420441	13.83 Volts	17.81 Deg.C
1786420142	13.48 Volts	17.81 Deg.C
1786419244	13.39 Volts	17.81 Deg.C
1786418944	13.42 Volts	17.32 Deg.C
1786418645	13.45 Volts	17.32 Deg.C
1786418345	13.42 Volts	17.81 Deg.C
1786418046	13.48 Volts	17.32 Deg.C
1786417747	13.42 Volts	17.32 Deg.C
1786417447	13.36 Volts	17.81 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.489, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)