This is the latest recevied telemetry packets stored in our database for station/object KH6UU-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794331546 | 413 Volts | 610 Deg.F | 307 | 0 | 0 |
| 1794327955 | 413 Volts | 610 Deg.F | 479 | 0 | 0 |
| 1794326159 | 413 Volts | 610 Deg.F | 310 | 0 | 0 |
| 1794320773 | 414 Volts | 611 Deg.F | 307 | 0 | 0 |
| 1794318978 | 413 Volts | 611 Deg.F | 302 | 0 | 0 |
| 1794315386 | 413 Volts | 611 Deg.F | 309 | 0 | 0 |
| 1794313591 | 414 Volts | 611 Deg.F | 307 | 0 | 0 |
| 1794311796 | 414 Volts | 611 Deg.F | 307 | 0 | 0 |
| 1794309999 | 414 Volts | 611 Deg.F | 307 | 0 | 0 |
| 1794308204 | 414 Volts | 611 Deg.F | 308 | 0 | 0 |
| 1794306409 | 414 Volts | 611 Deg.F | 305 | 0 | 0 |
| 1794304613 | 414 Volts | 611 Deg.F | 301 | 0 | 0 |
| 1794302817 | 414 Volts | 612 Deg.F | 301 | 0 | 0 |
| 1794301021 | 414 Volts | 612 Deg.F | 306 | 0 | 0 |
| 1794297429 | 415 Volts | 613 Deg.F | 305 | 0 | 0 |
| 1794295633 | 415 Volts | 613 Deg.F | 306 | 0 | 0 |
| 1794293837 | 415 Volts | 614 Deg.F | 303 | 0 | 0 |
| 1794288448 | 416 Volts | 616 Deg.F | 299 | 0 | 0 |
| 1794286652 | 416 Volts | 617 Deg.F | 294 | 0 | 0 |
| 1794284856 | 416 Volts | 618 Deg.F | 296 | 0 | 0 |
| 1794281262 | 417 Volts | 622 Deg.F | 291 | 0 | 0 |
| 1794279465 | 417 Volts | 624 Deg.F | 290 | 0 | 0 |
| 1794277667 | 417 Volts | 627 Deg.F | 281 | 0 | 0 |
| 1794275869 | 416 Volts | 630 Deg.F | 282 | 0 | 0 |
| 1794274072 | 417 Volts | 633 Deg.F | 276 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)