This is the latest recevied telemetry packets stored in our database for station/object DG1FI-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786409296 | 3.65 VDC | 24.8 C | 1022.25 hPa | 0 | 0 |
| 1786408393 | 3.66 VDC | 24.8 C | 1023.13 hPa | 0 | 0 |
| 1786407489 | 3.67 VDC | 24.9 C | 1021.63 hPa | 0 | 0 |
| 1786406586 | 3.68 VDC | 25.1 C | 1022 hPa | 0 | 0 |
| 1786405682 | 3.69 VDC | 25.2 C | 1021.88 hPa | 0 | 0 |
| 1786404779 | 3.7 VDC | 25.4 C | 1021.75 hPa | 0 | 0 |
| 1786403875 | 3.7 VDC | 25.5 C | 1020.88 hPa | 0 | 0 |
| 1786402973 | 3.71 VDC | 25.5 C | 1021.88 hPa | 0 | 0 |
| 1786402068 | 3.72 VDC | 25.5 C | 1021.25 hPa | 0 | 0 |
| 1786401165 | 3.73 VDC | 25.6 C | 1021.13 hPa | 0 | 0 |
| 1786400261 | 3.74 VDC | 25.6 C | 1020.5 hPa | 0 | 0 |
| 1786399357 | 3.75 VDC | 25.2 C | 1020.75 hPa | 0 | 0 |
| 1786398454 | 3.76 VDC | 25.8 C | 1022.5 hPa | 0 | 0 |
| 1786397550 | 3.77 VDC | 26.1 C | 1021.38 hPa | 0 | 0 |
| 1786396647 | 3.78 VDC | 25.9 C | 1021 hPa | 0 | 0 |
| 1786395744 | 3.79 VDC | 26.1 C | 1017.13 hPa | 0 | 0 |
| 1786394840 | 3.8 VDC | 26.2 C | 1021.38 hPa | 0 | 0 |
| 1786393936 | 3.81 VDC | 26.1 C | 1019.88 hPa | 0 | 0 |
| 1786393033 | 3.82 VDC | 26.1 C | 1018.88 hPa | 0 | 0 |
| 1786392129 | 3.83 VDC | 26.4 C | 1020.38 hPa | 0 | 0 |
| 1786391226 | 3.84 VDC | 26.5 C | 1019.38 hPa | 0 | 0 |
| 1786390322 | 3.85 VDC | 26.6 C | 1018.13 hPa | 0 | 0 |
| 1786389418 | 3.86 VDC | 26.9 C | 1018.13 hPa | 0 | 0 |
| 1786388515 | 3.88 VDC | 26.9 C | 1018.75 hPa | 0 | 0 |
| 1786387611 | 4.08 VDC | 28.1 C | 1019.88 hPa | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)