This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1764956218 | 3.75 V | 0 V | 440 mW | 29.5 degC | 99087.5 Pa |
| 1764956213 | 3.72 V | 0 V | 340 mW | 29.5 degC | 99087.5 Pa |
| 1764956152 | 3.76 V | 0 V | 312 mW | 29.1 degC | 99087.5 Pa |
| 1764956003 | 3.85 V | 0 V | 294 mW | 29.3 degC | 99087.5 Pa |
| 1764955890 | 3.75 V | 0 V | 378 mW | 29.5 degC | 99087.5 Pa |
| 1764955799 | 3.75 V | 0 V | 328 mW | 29.5 degC | 99087.5 Pa |
| 1764955763 | 3.74 V | 0 V | 288 mW | 29.3 degC | 99087.5 Pa |
| 1764955697 | 3.74 V | 0 V | 312 mW | 29.4 degC | 99075 Pa |
| 1764955506 | 3.75 V | 0 V | 404 mW | 29.6 degC | 99075 Pa |
| 1764955501 | 3.79 V | 0 V | 358 mW | 29.6 degC | 99075 Pa |
| 1764955416 | 3.75 V | 0 V | 324 mW | 29.3 degC | 99062.5 Pa |
| 1764955299 | 3.77 V | 0 V | 322 mW | 29.4 degC | 99062.5 Pa |
| 1764955177 | 3.76 V | 0 V | 368 mW | 29.4 degC | 99075 Pa |
| 1764955153 | 3.75 V | 0 V | 294 mW | 29.1 degC | 99075 Pa |
| 1764955028 | 3.74 V | 0 V | 270 mW | 29.1 degC | 99075 Pa |
| 1764954906 | 3.74 V | 0 V | 272 mW | 29.3 degC | 99075 Pa |
| 1764954772 | 3.84 V | 0 V | 348 mW | 29.8 degC | 99075 Pa |
| 1764954761 | 3.72 V | 0 V | 380 mW | 29.7 degC | 99075 Pa |
| 1764954706 | 3.74 V | 0 V | 472 mW | 30 degC | 99075 Pa |
| 1764954684 | 3.74 V | 0 V | 384 mW | 29.8 degC | 99075 Pa |
| 1764954650 | 3.74 V | 0 V | 472 mW | 30 degC | 99075 Pa |
| 1764954624 | 3.74 V | 0 V | 384 mW | 29.8 degC | 99075 Pa |
| 1764954464 | 3.75 V | 0 V | 350 mW | 29.6 degC | 99087.5 Pa |
| 1764954432 | 3.69 V | 0 V | 384 mW | 29.7 degC | 99087.5 Pa |
| 1764954428 | 3.75 V | 0 V | 350 mW | 29.6 degC | 99087.5 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)